Home > Arduino Board >

Arduino LCD Display Keypad Shield (datasheet) for Freeduino or Arduino Board

Product Categories

Shenzhen Shanhai Technology Ltd.

Contact Now

Arduino LCD Display Keypad Shield (datasheet) for Freeduino or Arduino Board

Name: Arduino LCD Display Keypad Shield datasheet for Freeduino or Arduino Board
Brand: arduino
Price: 19 USD

Place of Origin : china

Brand Name : arduino

Certification : CE

Model Number : arduino LCD shield

MOQ : 1

Price : 19

Delivery Time : 2-3 days

Payment Terms : TT advance paypal

Supply Ability : 10000pcs

Contact Now

Arduino LCD Display Keypad Shield (datasheet) for Freeduino or Arduino Board

Product Description

This is a very popular LCD Keypad shield for Arduino or Freeduino board. It can be directly plug onto the Arudino board, no soldering or fly-wiring needed. A 16x2 HD44780 compatible LCD, White character & Blue backlight.

This Shield uses Arudino LCD4Bit library.

Pin Allocation

Pin	Function
Analog 0	Button (select, up, right, down and left)
Digital 4	DB4
Digital 5	DB5
Digital 6	DB6
Digital 7	DB7
Digital 8	RS (Data or Signal Display Selection)
Digital 9	Enable
Digital 10	Backlit Control

Sample Code
Example use of LCD4Bit_mod library

LCD4Bit_mod Library Download

//#include <LCD4Bit_mod.h> //create object to control an LCD. //number of lines in display=1LCD4Bit_mod lcd = LCD4Bit_mod(2); //Key messagechar msgs[5][15] = {"Right Key OK ", "Up Key OK ", "Down Key OK ", "Left Key OK ", "Select Key OK" };int adc_key_val[5] ={30, 150, 360, 535, 760 };int NUM_KEYS = 5;int adc_key_in;int key=-1;int oldkey=-1;void setup() { pinMode(13, OUTPUT); //we'll use the debug LED to output a heartbeat lcd.init(); //optionally, now set up our application-specific display settings, overriding whatever the lcd did in lcd.init() //lcd.commandWrite(0x0F);//cursor on, display on, blink on. (nasty!) lcd.clear(); lcd.printIn("KEYPAD testing... pressing");}void loop() {adc_key_in = analogRead(0); // read the value from the sensor digitalWrite(13, HIGH); key = get_key(adc_key_in); // convert into key press if (key != oldkey) // if keypress is detected { delay(50); // wait for debounce time adc_key_in = analogRead(0); // read the value from the sensor key = get_key(adc_key_in); // convert into key press if (key != oldkey) { oldkey = key; if (key >=0){ lcd.cursorTo(2, 0); //line=2, x=0 lcd.printIn(msgs[key]); } } } digitalWrite(13, LOW);}// Convert ADC value to key numberint get_key(unsigned int input){ int k; for (k = 0; k < NUM_KEYS; k++) { if (input < adc_key_val[k]) { return k; } } if (k >= NUM_KEYS) k = -1; // No valid key pressed return k;}

Example use of LiquidCrystal library

//Sample using LiquidCrystal library#include <LiquidCrystal.h>/*******************************************************This program will test the LCD panel and the buttonsMark Bramwell, July 2010********************************************************/// select the pins used on the LCD panelLiquidCrystal lcd(8, 9, 4, 5, 6, 7);// define some values used by the panel and buttonsint lcd_key = 0;int adc_key_in = 0;#define btnRIGHT 0#define btnUP 1#define btnDOWN 2#define btnLEFT 3#define btnSELECT 4#define btnNONE 5// read the buttonsint read_LCD_buttons(){ adc_key_in = analogRead(0); // read the value from the sensor // my buttons when read are centered at these valies: 0, 144, 329, 504, 741 // we add approx 50 to those values and check to see if we are close if (adc_key_in > 1000) return btnNONE; // We make this the 1st option for speed reasons since it will be the most likely result if (adc_key_in < 50) return btnRIGHT; if (adc_key_in < 195) return btnUP; if (adc_key_in < 380) return btnDOWN; if (adc_key_in < 555) return btnLEFT; if (adc_key_in < 790) return btnSELECT; return btnNONE; // when all others fail, return this...}void setup(){ lcd.begin(16, 2); // start the library lcd.setCursor(0,0); lcd.print("Push the buttons"); // print a simple message} void loop(){ lcd.setCursor(9,1); // move cursor to second line "1" and 9 spaces over lcd.print(millis()/1000); // display seconds elapsed since power-up lcd.setCursor(0,1); // move to the begining of the second line lcd_key = read_LCD_buttons(); // read the buttons switch (lcd_key) // depending on which button was pushed, we perform an action { case btnRIGHT: { lcd.print("RIGHT "); break; } case btnLEFT: { lcd.print("LEFT "); break; } case btnUP: { lcd.print("UP "); break; } case btnDOWN: { lcd.print("DOWN "); break; } case btnSELECT: { lcd.print("SELECT"); break; } case btnNONE: { lcd.print("NONE "); break; } }}

Packaging Details

Unit Type:: piece

Package Weight:: 0.1kg (0.220lb.)

Package Size:: 10cm x 4cm x 3cm (3.94in x 1.57in x 1.18in)

Product Tags: