Arduino PS2 joystick game controller module Joystick Module
PS2 joystick game controller module standard interface and electronic building blocks 2.54mm pin interface leads.
Cross rocker as a two-way 10K resistor, with the rocker in a different direction, tapthe resistance with the change. This module uses 5V power supply, the original state of X, Y read voltage of 2.5V or so, when pressed with the direction of the arrow, asread out voltage increases up to 5V; press the opposite direction of the arrow, readvoltage reduce the minimum is 0V.
Arduino test case Demo
/*********************************************************************
** Device: Joystick **
** File: EF_Joystick_Test.c **
** **
** Created by ElecFreaks Robi.W /10 June 2011 **
** **
** Description: **
** This file is a sample code for your reference. **
** **
** Copyright (C) 2011 ElecFreaks Corp. **
*********************************************************************/
iint FirstShotX , FirstShotY;
void setup()
{
for(int i=0; i<19; i++)
{
pinMode(i, INPUT);
digitalWrite(i, 1);
}
Serial.begin(9600);
FirstShotX = 0;
FirstShotY = 0;
}
void loop(){
int i, someInt, flag = 0;
for(i=4; i<11; i++)
{
someInt = digitalRead(i);
if(someInt == 0)
{
flag =1;
break;
}
}
if(flag == 1)
{
switch(i)
{
case 4: Serial.println("--------> Button A"); break;
case 5: Serial.println("--------> Button B"); break;
case 6: Serial.println("--------> Button C"); break;
case 7: Serial.println("--------> Button D"); break;
case 8: Serial.println("--------> Button E"); break;
case 9: Serial.println("--------> Button F"); break;
case 10: Serial.println("--------> Button KEY"); break;
default: break;
}
flag=0;
}
int sensorValue = analogRead(A0);
if(FirstShotX == 0)
{
FirstShotX = sensorValue;
Serial.print("FirstShotX = ");
Serial.println(FirstShotX);
}
Serial.print("X = ");
Serial.println(sensorValue - FirstShotX);
sensorValue = analogRead(A1);
if(FirstShotY == 0)
{
FirstShotY = sensorValue;
Serial.print("FirstShotY = ");
Serial.println(FirstShotY);
}
Serial.print("Y = ");
Serial.println(sensorValue - FirstShotY);
delay(200);
}
|
|
5 pin two way Arduino PS2 joystick game controller modules / Joystick Module Images
|
